
Mugwort Clay Mask Stick OEM – 40 g Twist Case
Mugwort Clay Mask Stick OEM – 40 g Twist Case
Our Mugwort Clay Mask Stick OEM is a 40 g twist-up solid clay built on artemisia extract, kaolin, niacinamide and salicylic acid, hot-poured in a GMPC / ISO 22716 plant. Each Mugwort Clay Mask Stick ships private-label ready with COA, MSDS and INCI papers. Private label from MOQ 3000 pcs with free samples — get your brand started in 2 weeks.
Key Benefits
- 40 g / 1.41 oz twist case – dial the product up like a deodorant, cap it, done
- Ten-minute rinse – sets without the tight, cracking finish of a thin clay
- Mugwort plus niacinamide – artemisia for the calm story, niacinamide for tone
- Salicylic at the legal load – declared on the INCI, held inside the EU leave-on cap
Ingrédients principaux et fonctions
| Artemisia (Mugwort) Extract | the calming and purifying story buyers search for |
| Kaolin | white clay that carries the stick body and absorbs surface oil |
| Niacinamide | supports even tone where pores look enlarged |
| Salicylic Acid | oil-soluble exfoliant, capped at 2% for EU leave-on |
Target Consumers
This Mugwort Clay Mask Stick suits K-beauty and clean-clay brands, spa and facial-bar chains, travel and gym retail, and marketplace sellers who want a mask without a jar.
How to Use
Twist the Mugwort Clay Mask Stick up a few millimetres, glide over dry skin avoiding eyes and lips, leave 10 minutes, then rinse with lukewarm water. Two to three times a week.
FAQ
Q: What is the mugwort clay mask OEM low MOQ?
A: 3,000 pcs at 40 g in a stock twist case with your printed label – 120 kg of paste and one pour for your first Mugwort Clay Mask Stick run. A moulded case of your own moves the floor to 10,000 pcs.
Q: Why does a clay stick arrive cracked or pitted?
A: Because it was cooled at room temperature. A clay paste sets from the outside in, so the skin of the stick hardens while the core is still moving, and the seam opens in transit. We hot-pour at 75-80 C and run the case through a cooling tunnel, then trim the dome before capping. Ask any supplier whether they use a tunnel or a shelf – the answer explains the breakage rate you will see.
Q: Can a 40 g stick carry enough salicylic acid to do anything?
A: Enough to matter, not enough to peel. Salicylic acid is capped at 2% in EU leave-on products, and a clay stick sits on the face for ten minutes, so the exposure is short by design. A brand wanting a resurfacing claim should choose a rinse-off peel, not a mask stick – this format is for oil control and the look of pores.
Q: Which documents come with the first order?
A: Formula sheet with INCI names at sample stage; then COA, MSDS, micro test to ISO 17516 and a retained sample with bulk. Stability runs 12 weeks at 40 C before a lot is released, and the fill weight and dome height records travel with the batch.
Prêt à développer votre marque ? Parcourez notre catalogue OEM de masques faciaux ou contactez-nous pour obtenir gratuitement une maquette et un devis.
Besoin d'aide ? Contactez-nous
☎ Phone / WhatsApp: +86 133 6440 1300
✉ Mail [email protected]
🕐 Working Hours: Du lundi au samedi, de 9 h à 18 h (GMT+8)
✉ Renseignez-vous sur ce produit — Obtenez un devis gratuit
📍 Réserver une visite d'usine
Description
Table of Contents
Mugwort Clay Mask Stick OEM – 40 g Twist Case
Our Mugwort Clay Mask Stick is a 40 g twist-up solid clay in a light green case – no brush, no jar, no sink-side mess. MOQ 3,000 pcs, bulk in 30-35 days after artwork lock, ISO 22716 / GMPC plant. The formula pairs artemisia with niacinamide, salicylic acid and kaolin. Most buyers place this Mugwort Clay Mask Stick as the oil-control step in a three-item routine, next to a gel cleanser and a light moisturiser.
Why Brands Pick This Mugwort Clay Mask Stick
- 40 g / 1.41 oz twist case – dial the product up like a deodorant, cap it, done
- Ten-minute rinse – sets without the tight, cracking finish of a thin clay
- Mugwort stick mask plus niacinamide – artemisia for calm, niacinamide for tone
- Salicylic at the legal load – declared on the INCI, kept inside the EU leave-on cap
- Travel-safe – solid format, no liquid limit, no leak in a wash bag
- Papers per lot – COA, MSDS, INCI, micro report to ISO 17516
Caractéristiques techniques du produit
| Product Name | Mugwort Clay Mask Stick OEM 40 g |
| Key Ingredients | Artemisia (Mugwort) Extract, Kaolin, Niacinamide, Salicylic Acid |
| Format | Solid clay mask stick, twist-up case |
| Fill | 40 g / 1.41 oz per stick |
| Use | Apply to dry skin, leave 10 minutes, rinse |
| MOQ | 3,000 pcs stock case; 10,000 pcs moulded case |
| Certificates | ISO 22716, GMPC, GMP, FDS |
| Lead Time | 30-35 days after artwork lock; 15-25 on repeat |
Mugwort Clay Mask Stick: Why It Is Poured, Not Pressed
The blend is a low-water clay paste: kaolin carries the body, artemisia extract and niacinamide sit in the water phase, salicylic acid stays inside the EU leave-on limit of 2%. Low water activity is why this artemisia clay mask needs a lighter preservative package than a jar.
Pressing a stick looks cheaper and fails in transit. We hot-pour at 75-80 C into the case and run it through a cooling tunnel so the paste sets from the outside in. A stick cooled at room temperature traps air pockets, which arrive as a cracked column.
A 3,000 pcs run at 40 g is 120 kg of paste, mixed in a vacuum mixer and poured in one shift – the smallest mugwort clay mask bulk volume where one pour temperature covers the order.
Dome height is the defect nobody quotes for: overfill and the cap pushes into the paste, underfill leaves a gap on first twist. We trim before capping.
Mugwort Clay Mask Stick: Packaging and MOQ Ladder
The case is the whole cost story. A stock twist case lets a brand test the format at the mugwort clay mask OEM low MOQ of 3,000 pcs with a printed label and no tooling.
| Route | What changes | MOQ |
| Private label | Stock 40 g case, printed label, our formula | 3,000 pcs |
| OEM | Your formula, rheology run before bulk | 3,000 pcs |
| Full custom | Own mould for the case, colour match, silk print | 10,000 pcs |
A mould is cut per case geometry and cannot be shared, so 10,000 pcs is the floor for full custom. Any mugwort clay mask supplier quoting a bespoke case under 10,000 pcs is reusing someone else’s mould.
Mugwort Clay Mask Stick: Markets and Fit
In the EU this Mugwort Clay Mask Stick needs a CPNP notification and a Responsible Person, and salicylic acid declared with its leave-on limit respected – 2% is the ceiling. ‘Removes blackheads’ is a medical claim; ‘reduces the look of pores’ is not.
US buyers register under MoCRA and list the product; we supply the batch records behind the listing. Gulf importers want Arabic and English on the case wrap, a layout decision rather than a print one. Spa groups are the steadiest repeat buyers of a mugwort clay mask for spa use: one 40 g stick covers several back treatments and never dries between clients.
If you are comparing a mugwort clay mask manufacturer China factory with a trader, ask who hot-pours and who only labels. Not for you if you want a bubbling or peel-off format, or a first order under 3,000 pcs.
Our Factory and Quality Control

This artemisia clay mask runs on the hot-pour line: paste held at 75-80 C, filled by weight into the case, cooled, dome trimmed, cap torqued. Each lot is checked for fill weight, dome height, a twist test and a drop test. Micro runs to ISO 17516, a 40 C x 12-week test backs shelf life, and one retained sample stays two years.
Start Your Own Brand
Samples of this Mugwort Clay Mask Stick take 7-10 days, fee credited against bulk. A 3,000 pcs first order ships 30-35 days after artwork lock; a repeat clears in 15-25 days.
Shape that works: launch the 40 g mugwort stick mask alone at 3,000 pcs, prove the format, then add a 15 g travel size on the same paste.
For a mugwort clay mask wholesale programme, book paste and cases on one calendar – a case landing three weeks late turns a 30-day order into a 50-day one.
Related pages: aloe vera bubble mask | sakura collagen face mask | skincare packaging options and filling formats | Source: Fiche produit sur Alibaba
Additional Information
| MOQ | 5000 Pieces |
|---|---|
| Lead Time | 15-25 Days |
| Certification | ISO 22716, GMPC, FDA, CPNP, Halal, FDS |
| Service | OEM, ODM, marque de distributeur |





Avis
Il n’y a pas encore d’avis.