Collagen Jelly Stick Mask OEM 4 ml Anti-Wrinkle

Customize

Collagen Jelly Stick Mask OEM 4 ml Anti-Wrinkle

Our Collagen Jelly Stick Mask is a single-serve jelly facial mask: 4 ml of water-based gel in one tear-open sachet, built around. Private label from MOQ 5000 pcs with free samples — get your brand started in 2 weeks.

Key Benefits

  • 4 ml single-serve sachets – used in one sitting, so the gel never sits exposed in a jar
  • Collagen plus ceramide NP – film-forming protein backbone with a barrier lipid
  • Melt-on-skin jelly texture – no dripping, absorbs quickly, peels clean
  • Anti-wrinkle positioning – targets the look of fine dryness lines, cosmetic-lane only

Core Ingredients & Functions

Soluble Collagenforms the flexible film that grips and firms the feel of skin
Ceramide NPbarrier lipid that eases tightness after peel-off
Tocopherol (Vitamin E)antioxidant that keeps the gel phase stable
Glycerinhumectant that holds water in the upper layers

Target Consumers

Spa and salon chains, travel-retail brands and e-commerce sellers launching a single-serve anti-wrinkle jelly mask.

How to Use

Tear open one sachet, spread the gel over clean dry skin, leave until it sets, then peel off from the jawline upward; one sachet per use.

FAQ

Q: Where can I find a dependable collagen jelly stick mask supplier for private label?
A: Work with the filling plant, not a reseller. We fill in-house in a GMPC / ISO 22716 workshop and ship COA, MSDS, INCI and an ISO 17516 micro report with every lot – ask each supplier on your shortlist for the same four documents.

Q: What is the collagen jelly stick mask OEM low MOQ for a first order?
A: 5,000 sachets on stock film with your label on the outer box. Printed rolls and a bespoke carton move the start to 10,000 sachets because plates only pay off above that volume.

Q: Why a jelly stick instead of a jar for a collagen mask?
A: Hygiene and stability. A jar exposes the gel to fingers and air for weeks, so the preservative load climbs; a sealed 4 ml sachet is used in one sitting, keeping viscosity, pH and the ceramide phase consistent to the last unit. If you already sell a jar mask, this sachet sits beside it as the travel SKU.

Q: How do collagen jelly stick mask wholesale reorders work?
A: The approved film, carton and stability file stay on file, so wholesale reorders run 15-25 days with no re-testing; volume breaks apply at 10,000 and 50,000 sachets, each shipping with a fresh COA.

Ready to build your brand? Browse our Face Mask OEM catalog or contact us for a free mock-up and quote.

Need Help? Contact Us

☎ Phone / WhatsApp: +86 133 6440 1300

✉ Email: [email protected]

🕐 Working Hours: Monday – Saturday, 9:00 – 18:00 (GMT+8)

✉ Inquiry This Product — Get a Free Quote
📍 Book a Factory Visit

Description

Collagen Jelly Stick Mask OEM – 4 ml Anti-Wrinkle Sachets

Our Collagen Jelly Stick Mask is a single-serve jelly facial mask: 4 ml of water-based gel in one tear-open sachet, built around collagen, ceramide NP and tocopherol. The gel melts at skin temperature and peels off as a soft film, so the anti-wrinkle face mask claims stay in the cosmetic lane. Filled in a GMPC / ISO 22716 plant, private label starts at MOQ 5,000 sachets, bulk runs 15-25 days after packaging lock.

Why Brands Pick This Format

  • 4 ml single-serve sachets – one sitting per unit, nothing exposed in a jar
  • Collagen plus ceramide NP – film-forming backbone plus barrier lipid
  • Melt-on-skin jelly texture – no dripping, absorbs quickly, peels clean
  • Anti-wrinkle positioning – targets the look of fine dryness lines
  • Trial-size economics – the collagen stick mask bundles into gift sets
  • Paperwork per lot – COA, MSDS, INCI and a micro report to ISO 17516

Product Specifications

AttributeDetail
FormatCollagen Jelly Stick Mask, tear-open sachet, single use
Net content4 ml per sachet
Hero activesCollagen, Ceramide NP, Tocopherol
TextureWater-based jelly, peel-off film finish
MOQ5,000 sachets private label
Lead timeSampling 7-10 days; bulk 15-25 days after artwork lock

Format and MOQ decide whether this fits a trial SKU.

Inside the Jelly: Formula and Process

The Collagen Jelly Stick Mask runs on a water-based gel phase, not an emulsion – no cream base to split, no waxy afterfeel. Soluble collagen forms the flexible film that grips the skin; ceramide NP rides the same phase as a barrier lipid that eases tightness after peel-off; tocopherol keeps the gel stable through shelf life. Each sealed 4 ml dose carries a lighter preservative load than a 100 g jar, so the collagen jelly stick mask holds viscosity and pH through 40-degree accelerated stability runs. Filling is a cold-process line: homogenise, pH to 5.0-5.5, degas, fill, then pull-test the seal on every roll change.

Packaging Routes and MOQ for the Collagen Jelly Stick Mask

RouteWhat you getStarts at
Private labelStock gel formula, plain film, your label on the box5,000 sachets
Custom printPrinted sachet rolls, bespoke carton10,000 sachets
ODMNew gel phase and actives from your briefQuoted per brief

Buyers ordering collagen jelly stick mask bulk quantities start on the private label row and move reorder prints onto the custom row once the SKU proves itself.

Markets, Channels and Compliance

Spa chains searching for a collagen jelly stick mask for spa back-bars like the single-serve hygiene story – one sachet per guest, nothing decanted. Retail brands slot the collagen stick mask into travel packs beside a aloe vera bubble mask. Compliance is documented for EU CPNP notification, UK SCPN, US MoCRA ingredient disclosure and GCC bilingual labelling; claims stay on hydration and comfort, which keeps the anti-wrinkle face mask wording inside cosmetic rules in every lane above.

Collagen Jelly Stick Mask Manufacturer China: Factory and QC

As the filling plant behind this collagen jelly stick mask manufacturer China line, we run GMPC and ISO 22716 cleanrooms with micro testing to ISO 17516, 12-week accelerated stability per gel batch and two-year retention samples. Sampling files include COA, MSDS and INCI; bulk adds the batch micro report. A dependable collagen jelly stick mask supplier shows those four documents before you order.

A Brand-Owner Note on the Stick Format

At MOQ 5,000 sachets, a first order funds trial volume for a new Collagen Jelly Stick Mask before you commit to a printed roll. Most buyers run the plain-film row first, read the reorder rate at the 10,000-sachet print, then split the range into a hero anti-wrinkle SKU and a support hydration SKU.

Who this does not suit: brands that need a tube or jar on shelf, first orders under 5,000 sachets, or fragrance-heavy positioning a water gel cannot carry. Ask us to confirm before sampling: film compatibility with your viscosity and tear-notch peel force.

From Brief to Shipment

Brief lock, 7-10 days for samples, then 15-25 days of bulk filling once artwork is locked – 30-35 days overall. Reorders reuse the approved film and stability file, landing in 15-25 days with COA, MSDS and INCI.

Frequently Asked Questions

Where can I find a dependable collagen jelly stick mask supplier for private label?
Work with the filling plant, not a reseller. We fill in-house in a GMPC / ISO 22716 workshop and ship COA, MSDS, INCI and an ISO 17516 micro report with every lot.

What is the collagen jelly stick mask OEM low MOQ for a first order?
5,000 sachets on stock film with your label on the outer box; printed rolls and a bespoke carton move the start to 10,000 sachets.

Why a jelly stick instead of a jar for a collagen mask?
Hygiene and stability. A jar exposes the gel to fingers and air for weeks, so the preservative load climbs; a sealed 4 ml sachet is used in one sitting, keeping viscosity and the ceramide phase consistent. If you already sell a jar format such as our snail mucin face cream, this jelly facial mask sachet sits beside it as the travel SKU.

How do collagen jelly stick mask wholesale reorders work?
The approved film, carton and stability file stay on file, so wholesale reorders run 15-25 days with no re-testing; volume breaks apply at 10,000 and 50,000 sachets.

Send your brand brief to [email protected] for a free formula proposal, or see the custom skincare MOQ tiers.

Additional Information
MOQ

5000 Pieces

Lead Time

15-25 Days

Certification

ISO 22716, GMPC, FDA, CPNP, Halal, MSDS

Service

OEM, ODM, Private Label

Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Collagen Jelly Stick Mask OEM 4 ml Anti-Wrinkle”

Your email address will not be published. 必填项已用 * 标注